Reptile Enclosure Fan

Stimulate Natural Activity with Moving Air!

Natural environments are always changing with different weather events, moving air stimulates activity and enrichment.

Have more control over your reptile's habitat!  Too much humidity?  Ambient temps too high to maintain proper basking temps? 

These fans are a great solution for high humidity and Bioactive setups to prevent stagnant air and mold.  Just plug your fan into a timer set to run for short periods of time several times a day and that's it!

They can be setup with a dimmer to control speed, timer to control frequency or a thermostat control to turn on at a set humidity level or temperature. They easily mount over our Tortoise Shell Style Vents.

These small fans are a great addition to your reptile enclosure!  

Includes: 

(1)  Heavy-Duty Aluminum Fan. 

(1) Power Cord 

CFM: 51 

Measurements: 4.7x1x4.7 (LxWxH)

UL-certified with dual-ball bearings 

Can be used both directions. 

* Don't have the new style Tortoise Shell Vents on your enclosure, but you'd like to add a fan? These can be added to any vent simply by using the fan itself as a template to show where to drill.  A fan, drill & 5/32" drill bit is all you need.  

TIPS: 

We recommend mounting the fans on the exterior of the enclosure oriented so that they are pulling air out of the enclosure (this creates a softer breeze from other vents and openings in the enclosure(s).

Bioactive and High Humidity setups:

Mount on a lower vent (if available) pulling air out.  Plug fan into a simple mechanical timer (available at most home improvement stores) and set to run for 30 mins at a time 2-4 times daily or as needed.   

Low Humidity Setups:

Mount over an upper vent, pulling air out.  Plug fan into a thermostat control with a dehumidify setting (some Spyder Robotics Herpstats have this setting), set max humidity percent and done!  (If your house humidity is higher than this setting it is best to not use a fan- control humidity by choosing small water bowls placed on the cool side of enclosure and minimize moist substrate.

Hot Basking Setups:

Proper basking temps are essential and for some reptiles those are temps are HOT!  If you find that maintaining the proper basking temperature in your enclosure is causing your ambient temps to be too high a fan is a great solution!  Mount fan over an upper vent, pulling air out.  Plug fan into thermostat control with cooling mode (some Spyder Robotics Herpstats have this setting) and set max temp!

 Natural Stimulation:

Any of the above configurations WILL be stimulating for your reptile and provide extra enrichment and activity levels!  Learn your reptile's natural habitat and set your fan to a time when winds would likely pick up!  

FREE SHIPPING!

Free shipping applies to enclosures, stands, and hoods within the contiguous United States. No matter what size.

For freight shipments, lift gate service is always included to ensure safe and easy delivery at your location. No hidden fees, no surprises—just reliable service from start to finish.

Unfortunately, Alaska and certain remote locations are excluded due to high carrier rates and limited-service availability. If you’re placing an order from an excluded area, please contact us first—we’ll provide a tailored shipping quote and help explore available options.

Shipping Cost on heating & lighting will be calculated at checkout.

Flat-Packed for Safe Delivery & Easy Assembly:

All enclosures, stands, and hoods are shipped flat-packed to prevent damage during transit.

Each unit is pre-assembled for quality assurance, making final assembly a simple process. Just five body panels and the pre-assembled front frame (with door track already installed) need to be secured—and there's only one screw size required.

Assembly is straightforward: a screwdriver is all you’ll need. Easy-to-follow instructions are included with every order and can also be accessed HERE.

Lead Time:

Our lead times are updated frequently—please check this page right before placing your order to ensure you have up-to-date production scheduling.

Lead time refers to the period between placing your order and the time it ships out from our facility here in Joplin Mo.

We take pride in maintaining a reliable shipping schedule. Orders will ship no later than the timeframe listed below, and we keep a close eye on our workflow to ensure timeliness and transparency.

For Up-To-Date Shipping Times Click HERE.