Reptile Enclosure Fan

Stimulate Natural Activity with Moving Air!

Natural environments are always changing with different weather events, moving air stimulates activity and enrichment.

Have more control over your reptile's habitat!  Too much humidity?  Ambient temps too high to maintain proper basking temps? 

These fans are a great solution for high humidity and Bioactive setups to prevent stagnant air and mold.  Just plug your fan into a timer set to run for short periods of time several times a day and that's it!

Our fans are 51 CFM- which is enough to completely change the air out of the enclosure every couple of minutes depending on size. They can be setup with a dimmer to control speed, timer to control frequency or a thermostat control to turn on at a set humidity level or temperature. They easily mount over our Tortoise Shell Style Vents.

These small fans are a great addition to your reptile enclosure!  

Includes: 

(1)  Heavy-Duty Aluminum Fan. 

(1) Power Cord 

CFM: 51 

Measurements: 4.7x1x4.7 (LxWxH)

UL-certified with dual-ball bearings 

Can be used both directions. 

TIPS: 

We recommend mounting the fans on the exterior of the enclosure oriented so that they are pulling air out of the enclosure (this creates a softer breeze from other vents and openings in the enclosure(s).

Bioactive and High Humidity setups:

Mount on a lower vent (if available) pulling air out.  Plug fan into a simple mechanical timer (available at most home improvement stores) and set to run for 30 mins at a time 2-4 times daily or as needed.   

Low Humidity Setups:

Mount over an upper vent, pulling air out.  Plug fan into a thermostat control with a dehumidify setting (some Spyder Robotics Herpstats have this setting), set max humidity percent and done!  (If your house humidity is higher than this setting it is best to not use a fan- control humidity by choosing small water bowls placed on the cool side of enclosure and minimize moist substrate.

Hot Basking Setups:

Proper basking temps are essential and for some reptiles those are temps are HOT!  If you find that maintaining the proper basking temperature in your enclosure is causing your ambient temps to be too high a fan is a great solution!  Mount fan over an upper vent, pulling air out.  Plug fan into thermostat control with cooling mode (some Spyder Robotics Herpstats have this setting) and set max temp!

 Natural Stimulation:

Any of the above configurations WILL be stimulating for your reptile and provide extra enrichment and activity levels!  Learn your reptile's natural habitat and set your fan to a time when winds would likely pick up!  

Shipping Calculated at Checkout.

• We are proud to offer some of the most competitive Freight Shipping prices around! Lift Gate Service is always Included!

All of our HDPE / PVC Reptile Cages ship flat to save you money! Every Enclosure is pre-assembled to ensure quality and to make re-assembly easier. Assembly is very simple! All you need is a screw driver! Our front frames come pre-assembled with the glass door track installed, there are 5 body panels to fasten together and the frame- that's it and there's only one size screw! Easy to follow instructions are included and available here.

Our lead time is extremely important to us, and we keep a very close eye on our schedule to make sure orders ship out NO LATER than the below time frame. 

For Up-To-Date Shipping Times Click HERE.