Lock | Reptile Cage Lock | Adhesive Back Reptile Enclosure Lock

Adhesive Back Enclosure Lock

Secure your sliding glass doors with ease using these Adhesive Back Enclosure Lock—designed for tempered glass panels. This low-profile lock helps prevent escapes while maintaining a clean, unobtrusive look.

Please note if your enclosure comes with a frame brace, divider or other custom design you may need to trim down the lock track. See below. 

Installation Instructions

1. Remove the Front Glass Panel (Left Side)
Tilt and lift the left-side glass panel out of its track to maximize workspace and visibility of the rear panel.

2. Clean the Glass Edge
Thoroughly clean the edge of the rear glass panel using isopropyl alcohol or glass cleaner to remove dust, oils, and residue. Dry with a lint-free cloth.

3. Mark the Lock Position (Left side of the right glass panel)
Use a measuring tape or a square-edged tool to align the lock track accurately. Masking tape can be used as a temporary guide.

4. Check for Overhang and Lip Clearance

The lock track lip should sit flush against the edge of the glass panel.

For enclosures with frame braces, center dividers, or other custom structural features, it's important to double-check clearance before installation.
Slide the glass panel from one end to the other while holding the lock track in place, ensuring the lock lip does not come into contact with any structural components such as frame braces, center dividers, or custom enclosure features.

If the lock track lip interferes see below to modify the lip before attaching the lock.

5. Attach the Lock
Carefully peel off the adhesive backing.
Press the lock firmly onto the rear glass edge, keeping it aligned.
Hold in place for 30–60 seconds to ensure secure adhesion.

Trimming Your Lock for Clearance

• Use heavy-duty scissors or tin snips to trim the portion of the lip that wraps over the glass edge.
• If tools aren’t available, bend the lip back and forth until the lip snaps off cleanly. 

Free shipping applies to enclosures, stands, and hoods within the contiguous United States. No matter what size.

For freight shipments, lift gate service is always included to ensure safe and easy delivery at your location. No hidden fees, no surprises—just reliable service from start to finish.

Unfortunately, Alaska and certain remote locations are excluded due to high carrier rates and limited-service availability. If you’re placing an order from an excluded area, please contact us first—we’ll provide a tailored shipping quote and help explore available options.

Shipping Cost on heating & lighting will be calculated at checkout.

Flat-Packed for Safe Delivery & Easy Assembly:

All enclosures, stands, and hoods are shipped flat-packed to prevent damage during transit.

Each unit is pre-assembled for quality assurance, making final assembly a simple process. Just five body panels and the pre-assembled front frame (with door track already installed) need to be secured—and there's only one screw size required.

Assembly is straightforward: a screwdriver is all you’ll need. Easy-to-follow instructions are included with every order and can also be accessed HERE.

Lead Time:

Our lead times are updated frequently—please check this page right before placing your order to ensure you have up-to-date production scheduling.

Lead time refers to the period between placing your order and the time it ships out from our facility here in Joplin Mo.

We take pride in maintaining a reliable shipping schedule. Orders will ship no later than the timeframe listed below, and we keep a close eye on our workflow to ensure timeliness and transparency.

For Up-To-Date Shipping Times Click HERE.