



5'x4'x4' |Custom HDPE & PVC Reptile Enclosure | Luxury Reptile Cage
See current lead times & shipping details
Complete the scene
Add a Destination Background, real landscapes from the places your species call home.
Explore Destination Backgrounds →Choose options




This 5'x4'x4' reptile enclosure is constructed from high-grade HDPE-PVC, providing an ideal combination of durability and beauty. Perfect for that lizard, snake, or amphibian in your life, it provides a secure and aesthetically pleasing habitat in which you & your reptile can enjoy!
What comes with your 5x4x4 enclosure
- Steady heat, humidity under your control. A solid top is standard, so the enclosure holds the conditions you set — humid for a tropical build, dry for an arid one, adjusted with the vents. Most setups run lower wattage than they would in a glass tank.
- A frame that stays looking new. 3/4" HDPE, USA made, UV stabilized and colored all the way through, in seven finishes. It will not delaminate, chip, rot or swell, with superior scratch resistance. It also resists fingerprints.
- Doors that glide. The glass rides on its own track, quiet and smooth, and the track continues down the sides of the opening for a finished edge. Both doors lift and tilt out for cleaning.
- Glass you can trust. Two 1/4" sliding tempered safety doors with every edge polished, certified to ANSI Z97.1 and CPSC 16 CFR 1201 Category II and etched to prove it — the more stringent of the two federal categories.
- Ventilation that moves with you. Four Adaptive Vents across the upper back panel. Every one takes a cover or a fan, so airflow changes as your setup changes through seasons and species. Covers and fans sold separately.
- Panels built for the climate inside. 1/2" American-made PVC on top, bottom, back and sides. Holds temperature steadily and stays true in heat and humidity.
- A ceiling beam, standard. An aluminum ceiling beam comes with this size for added strength across the top panel.
- Wiring that stays tidy. Six cord slots in the top edge of the back panel for UVB, LED, heat and probe leads.
- Stacks without spacers. Two stainless steel dowels in our locking dowel system, which lines up across sizes so habitats, stands and hoods interconnect.
- A clean finish all round. Color-matched screw covers, so no screw heads show.
Built for bioactive
A living build keeps damp soil, roots and water against the walls every day. This enclosure is made for exactly that.
- Plastic, top to bottom. The PVC panels and HDPE frame are made for constant humidity. The frame will not delaminate, chip, rot or swell, and the panels absorb almost no water, so your enclosure stays square year after year.
- Tight seams. Every panel fits snug to the frame, so soil stays in and moisture stays where you put it. For a fully sealed build, run a bead of sealant along the inside edge of each seam.
- Easy to clean. Smooth surfaces wipe down with a damp cloth, and soil wipes off the frame with a dry paper towel.
- Room for real soil. A 6" lower frame comes standard, deep enough for a drainage layer and real substrate for burrowing, and it keeps the glass track above the grit. 8", 10" and 12" frames are available in the options above.
- Airflow you can tune. Every Adaptive Vent takes a cover or a fan, and side vents can be added low or high, so fresh air keeps moving across damp soil without drying your build out.
Configure your 5x4x4
A deeper lower frame, perforated aluminum screen tops, lookout windows, side vents, climbing shelves, grommets, probe channels and custom cuts are all chosen at order time, in the options above. See every option explained.
Prefer fewer vents, extra probe holes or cord slots somewhere specific? Select it above, or email us and we will build it your way.
5x4x4 reptile enclosure specifications
Toad Ranch sizes are true-to-size exterior dimensions. A 5x4x4 measures exactly 60" x 48" x 48" on the outside, which is the number that matters when you are fitting it to a space.
| Dimensions | 60"L x 48"W x 48"H |
| Construction | PVC enclosure with a 3/4" HDPE front frame and 1/4" tempered glass doors |
| Floor space | 20 square feet |
| Volume | 80 cubic feet |
| Gallons | About 600 US gallons |
Species suited to a 5x4x4
Ideal size for larger climbing species and big snakes that use every level — branches to climb and rest along, room for live plants to grow, and a true vertical gradient as well as warm and cool ends.
These species do especially well in it:
- Carpet pythons
- Redtail and other boas
- Larger tree-dwelling lizards such as frilled dragons and prehensile-tailed skinks
- Monitors that climb
- Green tree pythons and emerald tree boas
Growing into something bigger? Enclosures are expandable, so a 5x4x4 can become part of a larger build rather than something you replace.
Not sure whether this size suits your reptile? Email us.
Assembly
One screwdriver, one screw size, no special tools. The front frame arrives pre-assembled with the glass track fitted; you fasten five panels to it. It goes back together at home the way it came apart here — same panels, same holes, same hardware.
Shipping
Free shipping on enclosures, stands and hoods anywhere in the continental US — the listed price includes it. Limited-access and remote destinations are quoted separately. This size ships freight on a pallet with lift gate service, which lowers it from the truck bed to ground level, delivered curbside. The carrier does not bring it inside or set it up, and it arrives flat packed for you to assemble on site.
Trusted by zoos, nature centers and professional breeders
Toad Ranch Cages builds to order in Webb City, Missouri. Veteran owned, USARK member, and a registered vendor with state and federal government offices. Every enclosure, stand and hood is hand assembled and checked in the shop before it is flat packed to ship.
