4'x3'x2' | Custom HDPE-PVC Reptile Enclosure | Luxury Reptile Cage

48x36x24" Extra-Deep Luxury Reptile Enclosure

Sprawl-Worthy Space. Jungle-Ready Design. Built to Impress.

Create the ultimate terrarium with our 48"x36"x24" HDPE-PVC reptile enclosure—crafted to invite natural movement, deep burrowing, and vertical exploration. Its extra-deep footprint expands usable terrain without encroaching on wall space, making it the perfect canvas for lush plantings, immersive bioactive builds, and thoughtfully curated landscapes.

Whether you're cultivating a tropical forest floor or sculpting an arid desert basin, this enclosure delivers the space, safety, and craftsmanship to bring your habitat vision to life.

What comes with your 4x3x2 enclosure

---

• Steady heat, humidity under your control. A solid top is standard, so the enclosure holds the conditions you set — humid for a tropical build, dry for an arid one, adjusted with the vents. Most setups run lower wattage than they would in a glass tank.
• A frame that stays looking new. 3/4" HDPE, USA made, UV stabilized and colored all the way through, in seven finishes. It will not delaminate, chip, rot or swell, with superior scratch resistance. It also resists fingerprints.
• Doors that glide. The glass rides on its own track, quiet and smooth, and the track continues down the sides of the opening for a finished edge. Both doors lift and tilt out for cleaning.
• Glass you can trust. Two 1/4" sliding tempered safety doors with every edge polished, certified to ANSI Z97.1 and CPSC 16 CFR 1201 Category II and etched to prove it — the more stringent of the two federal categories.
• Ventilation that moves with you. Four Adaptive Vents across the upper back panel. Every one takes a cover or a fan, so airflow changes as your setup changes through seasons and species. Covers and fans sold separately.
• Panels built for the climate inside. 1/2" American-made PVC on top, bottom, back and sides. Holds temperature steadily and stays true in heat and humidity.
• A ceiling beam, standard. An aluminum ceiling beam comes with this size for added strength across the top panel.
• Wiring that stays tidy. Six cord slots in the top edge of the back panel for UVB, LED, heat and probe leads.
• Stacks without spacers. Two stainless steel dowels in our locking dowel system, which lines up across sizes so habitats, stands and hoods interconnect.
• A clean finish all round. Color-matched screw covers, so no screw heads show.

Built for bioactive

---

A living build keeps damp soil, roots and water against the walls every day. This enclosure is made for exactly that.

• Plastic, top to bottom. The PVC panels and HDPE frame are made for constant humidity. The frame will not delaminate, chip, rot or swell, and the panels absorb almost no water, so your enclosure stays square year after year.
• Tight seams. Every panel fits snug to the frame, so soil stays in and moisture stays where you put it. For a fully sealed build, run a bead of sealant along the inside edge of each seam.
• Easy to clean. Smooth surfaces wipe down with a damp cloth, and soil wipes off the frame with a dry paper towel.
• Room for real soil. A 3.5" lower frame comes standard to hold your substrate and keep the glass track clear. A 6" frame is available in the options above for deeper soil.
• Airflow you can tune. Every Adaptive Vent takes a cover or a fan, and side vents can be added low or high, so fresh air keeps moving across damp soil without drying your build out.

Configure your 4x3x2

---

Perforated aluminum screen tops, lookout windows, side vents, climbing shelves, grommets, probe channels and custom cuts are all chosen at order time, in the options above. See every option explained.

Prefer fewer vents, extra probe holes or cord slots somewhere specific? Select it above, or email us and we will build it your way.

4x3x2 reptile enclosure specifications

---

Toad Ranch sizes are true-to-size exterior dimensions. A 4x3x2 measures exactly 48" x 36" x 24" on the outside, which is the number that matters when you are fitting it to a space.

Dimensions	48"L x 36"W x 24"H
Construction	PVC enclosure with a 3/4" HDPE front frame and 1/4" tempered glass doors
Floor space	12 square feet
Volume	24 cubic feet
Gallons	About 180 US gallons
Weight	About 87 lb, varying with options

Species suited to a 4x3x2

---

Ideal size for terrestrial species that spend their day on the ground — foraging, basking, exploring, and thermoregulating across a proper horizontal gradient. The extra depth gives room for deep substrate to dig and burrow in, ground cover and rockwork, and enrichment across the floor.

These species do especially well in it:

• Bearded dragons
• Blue tongue skinks
• Uromastyx
• Smaller monitors and other lizards that want floor space
• Ball pythons, corn snakes, kingsnakes, hognose and rosy boas
• Juvenile redtail boas
• Russian and other smaller tortoises
• Box turtles
• Toads and frogs

Growing into something bigger? Enclosures are expandable, so a 4x3x2 can become part of a larger build rather than something you replace.

Not sure whether this size suits your reptile? Email us.

Heating and lighting for a solid-top enclosure

---

A solid top helps maintain stable temperature and reliable humidity. Fit your own heating and lighting and the basking site goes exactly where you want it — and moves if your setup changes. Heating and lighting are sold separately.

A typical warm side

• Two heat fixtures side by side make one broad basking zone. Two lower-wattage bulbs work better than one hot point, and they can run at full output without pushing past your set point.
• 50W–100W basking bulbs, chosen for your species and your room temperature
• A deep heat projector for radiant warmth with no visible light

Lighting

• A 24"–36" UVB fixture, covering half to two thirds of the length. See Arcadia's lighting guide for the percentage your species needs
• An LED bar for daylight spectrum, and for plant growth in a bioactive build

Safety

Any heat fixture mounted inside needs a wire safety basket, particularly with snakes and climbers. Always pair heating with a thermostat and a probe. If you would rather keep heat and light outside the enclosure entirely, choose the perforated aluminum screen top above.

Assembly

---

One screwdriver, one screw size, no special tools. The front frame arrives pre-assembled with the glass track fitted; you fasten five panels to it. It goes back together at home the way it came apart here — same panels, same holes, same hardware.

Shipping

---

Free shipping on enclosures, stands and hoods anywhere in the continental US — the listed price includes it. Limited-access and remote destinations are quoted separately. Units up to 5x2x2 ship UPS; larger units ship freight with lift gate service, delivered curbside and flat packed on a pallet for you to assemble on site.

Trusted by zoos, nature centers and professional breeders

---

Toad Ranch Cages builds to order in Webb City, Missouri. Veteran owned, USARK member, and a registered vendor with state and federal government offices. Every enclosure, stand and hood is hand assembled and checked in the shop before it is flat packed to ship.