Skip to content

Cart

Your cart is empty

Herpstat 4 | Reptile Heat, Light & Humidity Controller | Spyder Robotics

Sale price$399.00

In stock when shown as available. Ships in 1–5 business days. Ships separately from enclosures, stands and hoods.
See current lead times & shipping details
Herpstat 4 | Reptile Heat, Light & Humidity Controller  | Spyder Robotics
Herpstat 4 | Reptile Heat, Light & Humidity Controller | Spyder Robotics Sale price$399.00

Shipping Notice: Signature Required at Delivery

The Herpstat 4 features four probe & outlet jacks which are individually configurable. Safety was our goal with this device. We added a mechanical relay that can be enabled to cut the power circuit to all four outlets in case a solid-state component fails. Humidity control is also built into this device which can be as simple as timed misting sessions or full humidity control with our optional humidity sensor. We've added a soft startup feature to slowly add power on initial starts as well as a user selectable ramping between day and nighttime temperature settings as well as light ramping. A new revolutionary auto power matching algorithm constantly adjusts the power output to get the best regulation possible. High and low temperature tracking now also records the time and day of the event.

Version 2 added features include a new fanless control board for silent operation, Basking Assist mode that now provides compatibility with heating lamps as a heat source, both Dimming and Pulse proportional heating modes and a replaceable power cord.

The Herpstat 4 comes with four temperature probes and power cord.
Optional humidity sensing probes are available.

Dehumidify mode: No. This model's humidity modes run a mister or fogger to raise humidity. It can't switch a fan on to lower humidity. For that, choose a Herpstat SpyderWeb model or the Herpstat 6. Like every Herpstat, it can run a fan off temperature in cooling mode.

Dimensions: 8.2" wide x 2.2" tall x 6.25" deep (additional space required for cords exiting the back).

Check out the User's Manual for screen shots of the setup procedure.

Features:

  • Four grounded outlets capable of true proportional heating.
  • Constantly monitors and adjusts amount of heat necessary to maintain a target temperature (Usable range from 40°F to 150°F or 4°C to 65°C).
  • Outputs 1 & 2 configurable for Heating/Cooling/Lighting. Outputs 3 & 4 can be configured for Heating/Cooling/Humidity/Lighting with simulated sunrise/sunset and moonlight features.
  • Humidity control with timed sessions or regulated with an optional sensor.
  • Silent fanless design
  • Basking assist feature supports basking lights as a heat source.
  • Safety Relay can disconnect power to all four outlets if an error exists.
  • Soft startup slowly applies power during initial warmups.
  • User selectable temperature and light ramping allows day to night changes to occur slowly. (Up to 10 hours)
  • Sensor Matching allows the user to digitally calibrate the sensor output to match other equipment.
  • Night Drop feature built in with real time clock allows individual night drop settings for each output.
  • Cooling function allows control of basic cooling devices.
  • High / Low temperature tracking helps monitor heating system and enclosure efficiency.
  • Individually selectable High / Low temperature threshold alarms.
  • Precision sensors with internal resolution of .1125 °F and is accurate to ± .9 °F
  • Display and setting in tenths of a degree.
  • All settings are retained in memory even if power is lost.
  • Power Outage detection / tracking.
  • Temperature can be set / displayed in Fahrenheit or Celsius.
  • Easy to read backlit LCD display.
  • Removable sensors allow for easy replacement if necessary.
  • Each output is fused separately keeping an outage on one output from affecting the other.
  • Audible alarm system
  • Internal error detection shuts off heat if sensor fails or is disconnected.
  • Security Passcode option deters vandals.
  • 400-Watt rating for each output (1600 watts total output) sufficient for most incubators, rack systems, enclosures, and vivarium's.
  • 1 year limited warranty
  • 5 stars: 0 (0%)
  • 4 stars: 0 (0%)
  • 3 stars: 1 (100%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
C
Charles S.
Two outlets malfunctioning

I purchased the Herpstat 4 and was immediately excited when it arrived. The first two days is worked wonderfully, but then the issues started. I keep a Dumeril’s Boa which requires a hot spot of no more than 90 and warm side ambient temps from 80 to 85. I had the DHP plugged into outlet one and woke up to a hot side ambient of about 100 degrees. After some troubleshooting I realized the number one outlet was constantly providing voltage, even when disabled. I also discovered the number four outlet was doing the same. I verified by plugging a light into them when disabled and bingo, the light turned on with both of them. They also turned on the light when I set a temperature lower than what the probe was reading which should have applied no power, but they did.

Long story short, only outlets two and three work correctly so in essence, I purchased a Herpstat 2 by paying the price of a Herpstat 4. So disappointing.

UPDATE: After working with Spyder Robotics, they sent out a new Herpstat 4 and it works perfectly. If you have any issues, they will make it right in a prompt manner. I’d definitely recommend the product and chances are you will get a fully functional one.

Hi Charles, Sorry to hear you're having trouble with your Herpstat! If you ever run into issues, feel free to reach out via email—we’re always happy to help troubleshoot. We’ve personally used Herpstats for nearly 20 years without issue, so this definitely sounds like something we can either resolve or get replaced.

Spyder Robotics is a fantastic company and very responsive—I’ll send you an email to help get in touch with them. In the meantime, a few things to double-check: make sure the correct mode is selected. If “Cooling” or “Lighting” mode is active, the thermostat may behave differently—either reversing control or running on a timer. For heat bulbs, the ideal setting is Heating > Dimming (Proportional).

To our knowledge, these thermostats won’t fault in the “on” position—if there’s a fault, the output should stop supplying power. I’ll follow up via email and work with you to get this sorted. Thanks for your patience—we’ll get it resolved together! ️