4'x2.5'x5' | Custom HDPE-PVC Reptile Enclosure | Luxury Reptile Cage

Transform any space into a dramatic display with the 48x30x60 tall arboreal enclosure — whether showcased in a living room, office, or professional facility. Steady temperatures, a true end-to-end gradient, reliable humidity: the stable conditions your reptile needs, in an enclosure finished like furniture.

Ten square feet of floor and a full five feet above it — room for anything from a rainforest canopy to a rocky desert cliffside, with branches and vines running diagonally and front to back for a true three-dimensional climb. A tall lower frame supports deep soil for nesting, live planting and bioactive setups.

Create a one-of-a-kind naturalistic masterpiece that becomes the highlight of your home or collection.

What comes with your 4x2.5x5 enclosure

• Steady heat, humidity under your control. A solid top is standard, so the enclosure holds the conditions you set — humid for a tropical build, dry for an arid one, adjusted with the vents. Most setups run lower wattage than they would in a glass tank.
• A frame that stays looking new. 3/4" HDPE, USA made, UV stabilized and colored all the way through, in seven finishes. It will not delaminate, chip, rot or swell, with superior scratch resistance. It also resists fingerprints.
• Doors that glide. The glass rides on its own track, quiet and smooth, and the track continues down the sides of the opening for a finished edge. Both doors lift and tilt out for cleaning.
• Glass you can trust. Two 1/4" sliding tempered safety doors with every edge polished, certified to ANSI Z97.1 and CPSC 16 CFR 1201 Category II and etched to prove it — the more stringent of the two federal categories.
• Ventilation that moves with you. Four Adaptive Vents across the upper back panel. Every one takes a cover or a fan, so airflow changes as your setup changes through seasons and species. Covers and fans sold separately.
• Panels built for the climate inside. 1/2" American-made PVC on top, bottom, back and sides. Holds temperature steadily and stays true in heat and humidity.
• Built for bioactive. An 8" lower frame comes standard, deep enough for a drainage layer and real soil under a planted setup. 10", 12" and 16" are available in the options above.
• Wiring that stays tidy. Six cord slots in the top edge of the back panel for UVB, LED, heat and probe leads.
• Stacks without spacers. Two stainless steel dowels in our locking dowel system, which lines up across sizes so habitats, stands and hoods interconnect.
• A clean finish all round. Color-matched screw covers, so no screw heads show.

Configure your 4x2.5x5

A deeper lower frame, perforated aluminum screen tops, lookout windows, side vents, climbing shelves, grommets, probe channels and custom cuts are all chosen at order time, in the options above. See every option explained.

Prefer fewer vents, extra probe holes or cord slots somewhere specific? Select it above, or email us and we will build it your way.

4x2.5x5 reptile enclosure specifications

Toad Ranch sizes are true-to-size exterior dimensions. A 4x2.5x5 measures exactly 48" x 30" x 60" on the outside, which is the number that matters when you are fitting it to a space.

Species suited to a 4x2.5x5

Ideal size for arboreal species that spend their day up in the trees or a rocky outcrop with a bird's eye view. Ample space for adding small trees to root and grow, substantial branches to hunt and rest along, and enrichment at every level.

These species do especially well in it:

• Green tree pythons
• Emerald tree boas
• Amazon tree boas
• Carpet pythons
• Prehensile-tailed skinks
• New Caledonian giant geckos
• Frilled dragons
• Veiled and panther chameleons, with the perforated aluminum screen top
• Smaller monitors and other lizards that climb
• Juvenile redtail boas

Growing into something bigger? Enclosures are expandable, so a 4x2.5x5 can become part of a larger build rather than something you replace.

Not sure whether this size suits your reptile? Email us.

Assembly

One screwdriver, one screw size, no special tools. The front frame arrives pre-assembled with the glass track fitted; you fasten five panels to it. It goes back together at home the way it came apart here — same panels, same holes, same hardware.

Shipping

Free shipping on enclosures, stands and hoods anywhere in the continental US — the listed price includes it. Limited-access and remote destinations are quoted separately. This size ships freight with lift gate service, delivered curbside and flat packed on a pallet for you to assemble on site.

Trusted by zoos, nature centers and professional breeders

Toad Ranch Cages builds to order in Webb City, Missouri. Veteran owned, USARK member, and a registered vendor with state and federal government offices. Every enclosure, stand and hood is hand assembled and checked in the shop before it is flat packed to ship.

Free shipping applies to enclosures, stands, and hoods within the contiguous United States. No matter what size.

For freight shipments, lift gate service is always included to ensure safe and easy delivery at your location. No hidden fees, no surprises—just reliable service from start to finish.

Unfortunately, Alaska and certain remote locations are excluded due to high carrier rates and limited-service availability. If you’re placing an order from an excluded area, please contact us first—we’ll provide a tailored shipping quote and help explore available options.

Shipping Cost on heating & lighting will be calculated at checkout.

Flat-Packed for Safe Delivery & Easy Assembly:

All enclosures, stands, and hoods are shipped flat-packed to prevent damage during transit.

Each unit is pre-assembled for quality assurance, making final assembly a simple process. Just five body panels and the pre-assembled front frame (with door track already installed) need to be secured—and there's only one screw size required.

Assembly is straightforward: a screwdriver is all you’ll need. Easy-to-follow instructions are included with every order and can also be accessed HERE.

Lead Time:

Our lead times are updated frequently—please check this page right before placing your order to ensure you have up-to-date production scheduling.

Lead time refers to the period between placing your order and the time it ships out from our facility here in Webb City, Mo.

We take pride in maintaining a reliable shipping schedule. Orders will ship no later than the timeframe listed below, and we keep a close eye on our workflow to ensure timeliness and transparency.

For Up-To-Date Shipping Times Click HERE.