Toad Ranch
Quick Ship 4'x2'x2' | 4 Foot Luxury Reptile Enclosure
- Regular Price
- $683.00
- Sale Price
- $683.00
- Regular Price
- $761.00
- Unit Price
- per
See current lead times & shipping details
A 4x2x2 reptile enclosure that ships in two weeks. The same 48" x 24" x 24" habitat we build to order, with a shortlist of choices so your build starts right away.
Steady temperatures, a true end-to-end gradient and reliable humidity, with room to roam, climb and explore — in a furniture-grade enclosure that looks right at home in your living room.
What comes with your Quick Ship 4x2x2
- Steady heat, steady humidity. A solid top is standard, so the enclosure holds temperature where you set it and humidity stays put. Most setups run lower wattage than they would in a glass tank.
- A frame that stays looking new. 3/4" HDPE, USA made and colored all the way through, in seven finishes. It keeps its finish, resists fingerprints, and wipes clean with a dry paper towel.
- Doors that glide. The glass rides on its own track, quiet and smooth, and the track continues down the sides of the opening for a finished edge. Both doors lift and tilt out for cleaning.
- Glass you can trust. Two 1/4" sliding tempered safety doors with every edge polished, certified to ANSI Z97.1 and CPSC 16 CFR 1201 Category II and etched to prove it — the more stringent of the two federal categories.
- Ventilation that moves with you. Four Adaptive Vents across the upper back panel on every build. They stay whichever top panel you choose, so a screen top gives you airflow from above and across the back. Every vent takes a cover or a fan, sold separately.
- Panels built for the climate inside. 1/2" American-made PVC on top, bottom, back and sides. Holds temperature steadily and stays true in heat and humidity.
- Wiring that stays tidy. Six cord slots in the top edge of the back panel for UVB, LED, heat and probe leads.
- Stacks without spacers. Two stainless steel dowels in our locking dowel system, which lines up across sizes so habitats, stands and hoods interconnect.
- A clean finish all round. Color-matched screw covers, so no screw heads show.
Choose your Quick Ship 4x2x2
Quick Ship builds move fast because the choices are settled in advance. You pick your front frame color from seven finishes, black or white 1/2" PVC body panels, a solid or full screen top, a 3.5" or 6" substrate dam, and your glass door hardware. Everything else is built to our standard specification.
Side vents, lookout windows, climbing shelves, grommets, probe channels, custom cuts and the Executive upgrade are all chosen on the made-to-order 4x2x2, which runs on our standard lead time. See every option explained.
4x2x2 reptile enclosure specifications
Toad Ranch sizes are true-to-size exterior dimensions. A 4x2x2 measures exactly 48" x 24" x 24" on the outside, which is the number that matters when you are fitting it to a space.
| Dimensions | 48"L x 24"W x 24"H |
| Construction | PVC enclosure with a 3/4" HDPE front frame and 1/4" tempered glass doors |
| Floor space | 8 square feet |
| Volume | 16 cubic feet |
| Gallons | About 120 US gallons |
| Weight | About 69 lb, varying with options |
Species suited to a 4x2x2
Four feet of length creates a true temperature gradient and the room to use it. The distance between the warm end and the cool end allows your reptile to settle where it prefers through the day, and crossing that distance is what brings it out into the open — roaming, climbing, exploring, living as it would in the wild. That is where the best of keeping them happens. Eight square feet of floor for creating — bioactive setups, planted out builds, rocky outcrops. A climbing shelf adds a second level, extending how the enclosure can be used.
These species do especially well in it:
- Bearded dragons
- Blue tongue skinks
- Uromastyx
- Smaller monitors and other lizards that want horizontal space
- Ball pythons, corn snakes, kingsnakes and rosy boas
- Juvenile redtail boas
- Younger turtles and tortoises
- Toads and frogs
Growing into something bigger? Enclosures are expandable, so a 4x2x2 can become part of a larger build rather than something you replace.
Not sure whether this size suits your reptile? Email us.
Heating and lighting for a solid-top enclosure
A solid top helps maintain stable temperature and reliable humidity. Fit your own heating and lighting and the basking site goes exactly where you want it — and moves if your setup changes. Heating and lighting are sold separately.
A typical warm side
- Two heat fixtures side by side make one broad basking zone. Two lower-wattage bulbs work better than one hot point, and they can run at full output without pushing past your set point.
- 50W–100W basking bulbs, chosen for your species and your room temperature
- A deep heat projector for radiant warmth with no visible light
Lighting
- A 24"–36" UVB fixture, covering half to two thirds of the length. See Arcadia's lighting guide for the percentage your species needs
- An LED bar for daylight spectrum, and for plant growth in a bioactive build
Safety
Any heat fixture mounted inside needs a wire safety basket, particularly with snakes and climbers. Always pair heating with a thermostat and a probe. If you would rather keep heat and light outside the enclosure entirely, choose the full screen top above.
Assembly
One screwdriver, one screw size, no special tools. The front frame arrives pre-assembled with the glass track fitted; you fasten five panels to it. It goes back together at home the way it came apart here — same panels, same holes, same hardware.
Shipping
Free shipping on enclosures, stands and hoods anywhere in the continental US — the listed price includes it. Limited-access and remote destinations are quoted separately. Units up to 5x2x2 ship UPS; larger units ship freight with lift gate service, delivered curbside and flat packed on a pallet for you to assemble on site.
Trusted by zoos, nature centers and professional breeders
Toad Ranch Cages builds to order in Webb City, Missouri. Veteran owned, USARK member, and a registered vendor with state and federal government offices. Every enclosure, stand and hood is hand assembled and checked in the shop before it is flat packed to ship.
Free shipping applies to enclosures, stands, and hoods within the contiguous United States. No matter what size.
For freight shipments, lift gate service is always included to ensure safe and easy delivery at your location. No hidden fees, no surprises—just reliable service from start to finish.
Unfortunately, Alaska and certain remote locations are excluded due to high carrier rates and limited-service availability. If you’re placing an order from an excluded area, please contact us first—we’ll provide a tailored shipping quote and help explore available options.
Shipping Cost on heating & lighting will be calculated at checkout.
Flat-Packed for Safe Delivery & Easy Assembly:
All enclosures, stands, and hoods are shipped flat-packed to prevent damage during transit.
Each unit is pre-assembled for quality assurance, making final assembly a simple process. Just five body panels and the pre-assembled front frame (with door track already installed) need to be secured—and there's only one screw size required.
Assembly is straightforward: a screwdriver is all you’ll need. Easy-to-follow instructions are included with every order and can also be accessed HERE.
Lead Time:
Our lead times are updated frequently—please check this page right before placing your order to ensure you have up-to-date production scheduling.
Lead time refers to the period between placing your order and the time it ships out from our facility here in Webb City, Mo.
We take pride in maintaining a reliable shipping schedule. Orders will ship no later than the timeframe listed below, and we keep a close eye on our workflow to ensure timeliness and transparency.
For Up-To-Date Shipping Times Click HERE.
