Herpstat 6 | Reptile Heat, Light & Humidity Controller | Spyder Robotics

The Herpstat 6 vivarium controller features six probe & outlet jacks which are individually configurable. This unit features a built in mechanical relay that can be enabled to cut the power circuit to all six outlets in case a solid state component fails. Humidity control is also built into this device which can be as simple as timed misting sessions or full humidity control with our optional humidity sensor. The soft startup feature slowly adds power on initial starts as well as a user selectable ramping between day and nighttime temperature settings.  Light ramping to simulate sunrise/sunset is also built in.   

Includes 6 temperature probes and power cord.

Optional humidity sensing probes are available.

Features:

·Six grounded outlets capable of true proportional heating. 

·Constantly monitors and adjusts amount of heat necessary to maintain a target temperature (Usable range from 40°F to 150°F or 4°C to 65°C). 

·Outputs 1, 2, 5, 6 are configurable for Heating/Cooling/Lighting. Outputs 3 & 4 can be configured for Heating/Cooling/Humidity/Lighting with simulated sunrise/sunset and moonlight features. 

·Humidity control with timed sessions or regulated with an optional sensor. 

·Basking assist feature supports basking lights as a heat source. 

·Safety Relay can disconnect power to all six outlets if an error exists. 

·Soft startup slowly applies power during initial warmups. 

·User selectable temperature and light ramping allows day to night changes to occur slowly. (Up to 10 hours) 

·Sensor Matching allows the user to digitally calibrate the sensor output to match other equipment. 

·Night Drop feature built in with real time clock allows individual night drop settings for each output. 

·Cooling function allows control of basic cooling devices. 

·High / Low temperature tracking helps monitor heating system and enclosure efficiency. 

·Individually selectable High / Low temperature threshold alarms. 

·Precision sensors with internal resolution of .1125 °F and is accurate to ± .9 °F 

·Display and setting in tenths of a degree. 

·All settings are retained in memory even if power is lost. 

·Power Outage detection / tracking. 

·Temperature can be set / displayed in Fahrenheit or Celsius. 

·Easy to read backlit LCD display. 

·Removable sensors allow for easy replacement if necessary. 

·Each output is fused separately keeping an outage on one output from affecting the other. 

·Audible alarm system 

·Internal error detection shuts off heat if sensor fails or is disconnected. 

·Security Passcode option deters vandals. 

·375 Watt rating for each output (1800 watts total output) sufficient for most incubators, rack systems, enclosures, and vivarium's. 

·1 year limited warranty

Note:  The Wi-Fi features of this product are for advanced users who are familiar with connecting to wifi, their router, and such. These features are not required to use this as a thermostat and its device menus are very similar to our previous models.

See the user manual: Microsoft Word - herpstat6_manual.doc

Shipping Calculated at Checkout.

• We are proud to offer some of the most competitive Freight Shipping prices around! Lift Gate Service is always Included!

All of our HDPE / PVC Reptile Cages ship flat to save you money! Every Enclosure is pre-assembled to ensure quality and to make re-assembly easier. Assembly is very simple! All you need is a screw driver! Our front frames come pre-assembled with the glass door track installed, there are 5 body panels to fasten together and the frame- that's it and there's only one size screw! Easy to follow instructions are included and available here.

Our lead time is extremely important to us, and we keep a very close eye on our schedule to make sure orders ship out NO LATER than the below time frame. 

For Up-To-Date Shipping Times Click HERE.